Did you activate mj before mixing it with the alcohol? Cause I'm trying to find out did you do that or no. It's kinda important, u know) To activate THC before mixing mj with the alcohol.
Better use ethanol! It´s more expensive, but isopropanol for example is double so toxic than ethanol! You can also use ethanol for more stuff with cannabis!
You need to fix the error in your video where you said to use denatured alcohol. Denatured alcohol is poisonous and not the same thing as a high % grain alcohol like everclear.
Denatured alcohol has methanol deliberately added to make it unfit and poisonous for direct human consumption. Methanol consumed in even small quantities can kill you or permanently blind you. That being said, methanol has a lower boiling point than ethanol. Therefore when the extraction is boiled the first component to leave is the methanol. With the boiling off of the alcohol, there should be zero methanol left. But….would you want to take a chance of being permanently blind?
All you needed to do was a winterization and your oil would have been so much more cleaner and Golden, that’s what gives you that clear looking wax! Worth the wait! #plantwaxesdontmatter
this dude is sooooooo unsafe bro..early in video jar of alcohol next to a preheating "hotplate"…then lifting the product on the hotplate..im sure there was more
My apologies i meant no disrespect. i just find this topic confusing as there are so many variations and opinions I'm not sure what method to follow .Cheers
This video contradicts the other half dozen videos i have watched on this topic particularly the use of denatured alcohol, heating on a kitchen stove to name a few. I am starting to wonder how many people doing these how to videos actually know how to.
For shatter you need to stur it longer but first put it in the chamber ;)) then you have you solid and clean extract wax .. Then try to put it in a small pyrex dish .. warm it slow and low heat ;)arround the 115-120 degrees CELSIUS.. The wax will get clear again and after a hour or so and still sturring you will have your clear shatter ;))
You can also put the pyrex dish right at once in the warm water .. THEN start the extraction so you poor it in an already warm dish . The proces starts immidiatly ;)) And it takes way shorter than the way first plate then i side then on water … But Hey everybody makes his medicine on his or her own way offcourse 😉 its just a tip ;))
When collecting and it’s herd to come off would putting it in a hot water bath to make it easier
Did you activate mj before mixing it with the alcohol? Cause I'm trying to find out did you do that or no. It's kinda important, u know) To activate THC before mixing mj with the alcohol.
So are you from ky.?
Is this a low yield?
Why did you use denatured?
teenys on first attempt
Mmmmmmkayyy
Why in hell would you use denatured alcohol?!? If you're watching this to learn dont do it, look up qwet.
Make the Filter wet with alcohol before✌🏻
te re pesa chabon
Hey someone mentioned that you could use parchment paper when it’s drying soo you don’t have to scrape can you do a video on that?
Idk what way is the right way but this ain't it. That looks like tar
Looks like a waste of a half ounce to me cuz it looks like reclaim
Better use ethanol! It´s more expensive, but isopropanol for example is double so toxic than ethanol!
You can also use ethanol for more stuff with cannabis!
Nice! Guess what I’m doing tomorrow!
Awesome
Best part scrapping 2 best high
jesus lord dont use denatured achohal the "denatured" portion is chemicals designed to make you blind to keep you from Ingesting it
Isnt denatured alcohol poisons
He's not SURE HOW FLAMMABLE IT IS?!?!?!?! OMFG
You should delete the video or rename it to "How NOT to make shatter"
DO NOT USE DENATURED ALCOHOL.
You need to fix the error in your video where you said to use denatured alcohol. Denatured alcohol is poisonous and not the same thing as a high % grain alcohol like everclear.
Cold. Patience. Speed
Holy fucking chlorophyll batman!
I prefer iso alcohol. Rubbing alcohol
The way you're using that sir mother I don't think it's keeping up a good record of the temperature
Check my video on diy bho extraction wax shatter
You don’t know how flammable everclear is? That’s what I heard.
Denatured alcohol has methanol deliberately added to make it unfit and poisonous for direct human consumption. Methanol consumed in even small quantities can kill you or permanently blind you. That being said, methanol has a lower boiling point than ethanol. Therefore when the extraction is boiled the first component to leave is the methanol. With the boiling off of the alcohol, there should be zero methanol left. But….would you want to take a chance of being permanently blind?
All you needed to do was a winterization and your oil would have been so much more cleaner and Golden, that’s what gives you that clear looking wax! Worth the wait! #plantwaxesdontmatter
It looks green because it is green, you soaked it wayyyy to long. It's not "the camera" making it look green 😂😂
Dab break lmao got me laughing just subscribed
That's some nasty, waxy, toxic sludge. Smoke Up Johnny!
this dude is sooooooo unsafe bro..early in video jar of alcohol next to a preheating "hotplate"…then lifting the product on the hotplate..im sure there was more
Subscribed thank you for the content and info.
Ground it too fine, used denatured alcohol (🙄🍸)… I’ll stop there but could go on.
My apologies i meant no disrespect. i just find this topic confusing as there are so many variations and opinions I'm not sure what method to follow .Cheers
This video contradicts the other half dozen videos i have watched on this topic particularly the use of denatured alcohol, heating on a kitchen stove to name a few. I am starting to wonder how many people doing these how to videos actually know how to.
Why not use potato vodka instead of alcohol you can use Everclear
doesnt even look good for rosin, with it being bho I would stay far away from that
Generators are too loud
For shatter you need to stur it longer but first put it in the chamber ;)) then you have you solid and clean extract wax .. Then try to put it in a small pyrex dish .. warm it slow and low heat ;)arround the 115-120 degrees CELSIUS.. The wax will get clear again and after a hour or so and still sturring you will have your clear shatter ;))
You can also put the pyrex dish right at once in the warm water .. THEN start the extraction so you poor it in an already warm dish . The proces starts immidiatly ;)) And it takes way shorter than the way first plate then i side then on water … But Hey everybody makes his medicine on his or her own way offcourse 😉 its just a tip ;))